|
Ultrasonic Repair
Rebuilding Ultrasonic Converters and Ultrasonic Transducers
When you send us your Converter / Transducer we test and inspect it to make
sure that the problem with your system is in fact the Converter / Transducer
and not something else. If this is the case we will take the driver out of
the canister and replace it with a totally new driver that has been aging on
our shelves for at least 6 months. The driver represents all of the internal
components that are needed for the ultrasonic converter / transducer to operate. Once
these are replaced in the canister, and the top is secured in place, the
Converter / Transducer is tested in air and then under load for power draw, frequency
and impedance. If the numbers look good, they are recorded and your
Converter / Transducer is shipped back to you.
Our Other services: Ultrasonic repair, Ultrasonic generator repair, ultrasonic power supply repair, Used ultrasonic welders, acoustic tooling.
If you don't have an old ultrasonic converter or ultrasonic transducer to ship back you may
purchase a complete new one from us.
Ultrasonic Tooling / Ultrasonic Horns
BEK manufactures all types of custom and standard Ultrasonic horns and
fixtures. Whether it is a contoured Custom Ultrasonic horn or fixture or a
standard one. We do it all.
The materials we use for manufacturing Ultrasonic horns may be Aluminum,
Titanium, Hardened Steel or CPM10V depending upon your application. We can
duplicate any horn that you are currently using or manufacture a new one for
you based on your part composition, weld area, and amplitude required.
If documentation is requested it will be provided with your order.
We also resurface and re-tune worn horns that have drifted out of frequency.
BEK will test your Ultrasonic Horn, Booster and Converter together and
individually for any problems. There is no charge for this service.
Application Feasibility
We are available to make assembly design recommendations on any of your
upcoming applications or trouble shoot your existing applications if there are
assembly problems.
Equipment Recommendations
We can also recommend the best process and equipment for your assembly
without restriction or influence.
Used Equipment is always available upon request.
|
